Researchers create 3-D-printed soft mesh robots

Researchers create 3-D-printed soft mesh robots

Researchers at North Carolina State University have created 3-D-printed flexible mesh structures that can be controlled with applied magnetic fields while floating on water. The structures can grab small objects and carry water droplets, giving them the potential to be useful as soft robots that mimic creatures living on water surfaces or that can serve as tissue scaffolds for cell cultures.

"This research shows capabilities in the emerging field of combining 3-D printing and soft robotics," said Orlin Velev, S. Frank and Doris Culberson Distinguished Professor of Chemical and Biomolecular Engineering at NC State and corresponding author of a paper describing the research.

To create these structures, the researchers made an "ink" from silicone microbeads, bound by liquid silicone and contained in . The resulting "homocomposite thixotropic paste" resembles common toothpaste, which can easily be squeezed out of a tube but then maintains its shape on your toothbrush without dripping. The researchers used a 3-D printer to shape the paste into mesh-like patterns. The patterns are then cured in an oven to create flexible silicone structures that can be controlled—stretched and collapsed—by the application of magnetic fields.

"This self-reinforced paste allows us to create structures that are ultra-soft and flexible," said Sangchul Roh, an NC State Ph.D. student in Velev's lab and first author of the paper.

"Embedding of iron carbonyl particles, which are widely available and have a high magnetization, allows us to impart a strong response to gradients," added Joseph Tracy, professor of materials science and engineering and a senior co-investigator on the project.

"The structures are also auxetic, which means that they can expand and contract in all directions," Velev said. "With 3-D printing, we can control the shape before and after the application of the magnetic field."

The structures' properties also allow them to be used while floating on water, similar to water striders, or insects that skim or hop across water surfaces.

"Mimicking live tissues in the body is another possible application for these structures," Roh said.

In the paper, published in a special issue of Advanced Materials Technologies, the researchers showed how they were able to design reconfigurable meshes, a structure that could "grab" a tiny ball of aluminum foil and a that can "carry" a single water droplet and then release it on demand through the mesh.

"For now, this is an early stage proof-of-concept for a soft robotic actuator," Velev said.

More information: Sangchul Roh et al, 3D-Printed Silicone Soft Architectures with Programmed Magneto-Capillary Reconfiguration, Advanced Materials Technologies (2019). DOI: 10.1002/admt.201800528

Citation: Researchers create 3-D-printed soft mesh robots (2019, January 23) retrieved 28 March 2024 from https://techxplore.com/news/2019-01-d-printed-soft-mesh-robots.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

New technique enables 3-D printing with paste of silicone particles in water

108 shares

Feedback to editors