Fiber OLEDs thinner than a hair

Fiber OLEDs thinner than a hair
Fiber-based OLEDs woven into knitted clothes. Credit: The Korea Advanced Institute of Science and Technology (KAIST)

Professor Kyung Cheol Choi from the School of Electrical Engineering and his team have fabricated highly efficient organic light-emitting diodes (OLEDs) on an ultra-thin fiber. The team expects the technology, which produces high-efficiency, long-lasting OLEDs, to be widely used in wearable displays.

Existing fiber-based wearable displays' OLEDs show much lower performance compared to those fabricated on planar substrates. This low performance caused a limitation for applying it to actual wearable displays.

In order to solve this problem, the team designed a structure of OLEDs compatible to fiber and used a dip-coating method in a three-dimensional structure of fibers. Through this method, the team successfully developed efficient OLEDs that are designed to last a lifetime and are still equivalent to those on planar substrates.

The team identified that solution process planar OLEDs can be applied to fibers without any reduction in performance through the technology. This fiber OLEDs exhibited luminance and current efficiency values of over 10,000 cd/m^2(candela/square meter) and 11 cd/A (candela/ampere).

The team also verified that the fiber OLEDs withstood tensile strains of up to 4.3 percent while retaining more than 90 percent of their current efficiency. In addition, they could be woven into textiles and knitted clothes without causing any problems.

Moreover, the technology allows for fabricating OLEDs on fibers with diameters ranging from 300㎛ down to 90㎛, thinner than a human hair, which attests to the scalability of the proposed fabrication scheme.

Noting that every process is carried out at a low temperature (~105℃), fibers vulnerable to high temperatures can also employ this fabrication scheme.

Professor Choi said, "Existing fiber-based wearable displays had limitations for applicability due to their low performance. However, this can fabricate OLEDs with high on fibers. This simple, low-cost process opens a way to commercialize fiber-based wearable displays."

This research, led by Seonil Kwon, was published inNano Letters on December 6.

More information: Seonil Kwon et al. Weavable and Highly Efficient Organic Light-Emitting Fibers for Wearable Electronics: A Scalable, Low-Temperature Process, Nano Letters (2017). DOI: 10.1021/acs.nanolett.7b04204

Journal information: Nano Letters

Citation: Fiber OLEDs thinner than a hair (2018, January 10) retrieved 17 April 2024 from https://phys.org/news/2018-01-fiber-oleds-thinner-hair.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Researchers develop highly flexible, wearable display

15 shares

Feedback to editors