New approach could enable low-cost silicon devices in fibers that could be made into fabrics

New approach could enable low-cost silicon devices in fibers that could be made into fabrics
Graduate student Chong Hou holds a bag of drawn fibers. The fibers are as thin as 100 micrometers in diameter, and the material coating further enhances the strength of the fibers. Credit: Jose-Luis Olivares/MIT

Scientists have known how to draw thin fibers from bulk materials for decades. But a new approach to that old method, developed by researchers at MIT, could lead to a whole new way of making high-quality fiber-based electronic devices.

The idea grew out of a long-term research effort to develop multifunctional that incorporate different into a single long functional strand. Until now, those long strands could only be created by arranging the materials in a large block or cylinder called a preform, which is then heated and stretched to create a thin fiber that is drastically smaller in diameter, but retains the same composition.

Now, for the first time, fibers created through this method can have a composition that's completely different from that of the starting materials—an advance that lead researcher Yoel Fink refers to as a kind of "alchemy," turning inexpensive and abundant materials into high-value ones. The new findings are described in a paper in the journal Nature Communications co-authored by graduate student Chong Hou, and six others at MIT and in Singapore.

The fibers are made from aluminum metal and silica glass, abundant low cost materials, which are commonly used to make windows and window frames. The aluminum metal and react chemically as they are heated and drawn, producing a fiber with a core of pure, —the raw material of computer chips and solar cells—and a coating of silica.

The initial discovery was a complete surprise: In experiments designed to test the possibility of incorporating metal wires inside fibers, Hou tried a variety of metals, including silver, copper, and aluminum—and in the latter case, the result was not what they expected.

"When I looked at the fiber, instead of a shiny metallic core, I observed a dark substance; I really didn't know what happened," says Hou, who is the lead author of the paper. Upon analysis, the researchers found that the core had turned to silicon—in fact, very pure, crystalline silicon.

New approach could enable low-cost silicon devices in fibers that could be made into fabrics
Different kinds of low-cost silicon dioxide tubes and rods sit in the lab. Researchers experimented by filling these tubes with a variety of metals to make a preform. When they tried aluminum, they found unexpected results. Jose-Luis Olivares/MIT

"My initial reaction might have been to discard the sample altogether," Fink says, after seeing that the experiment "failed" to produce the expected result. But instead, Hou began to examine the specimen and apply rigorous analysis, soon realizing that the mundane result he expected was replaced by a surprising one—which is how this discovery came about.

It turned out that the chemical reaction in the fiber was a well-known one: At the high temperatures used for drawing the fiber, about 2,200 degrees Celsius, the pure aluminum core reacted with the silica, a form of silicon oxide. The reaction left behind pure silicon, concentrated in the core of the fiber, and aluminum oxide, which deposited a very thin layer of aluminum between the core and the silica cladding.

Now, Hou says, "We can use this to get electrical devices, like solar cells or transistors, or any silicon-based semiconductor devices, that could be built inside the fiber." Many teams have tried to create such devices within fibers, he says, but so far all of the methods tried have required starting with expensive, high-purity silicon.

"Now we can use an inexpensive metal," Hou says. "It gives us a new approach to generating a silicon-core fiber."

Fink, who is a professor of materials science and electrical engineering and head of MIT's Research Laboratory of Electronics, says this represents "the first time that a fiber is drawn which is radically different from its preform. … It opens new opportunities in fiber materials and fiber devices through value-added processing."

New approach could enable low-cost silicon devices in fibers that could be made into fabrics
Hou holds a leftover silica preform after it has been used. The tapering tip shows how the preform is stretched to make long strands of fiber while in the furnace. Credit: Jose-Luis Olivares/MIT

"We want to use this technique to generate not only silicon inside, but also other materials," Hou says. In addition, the team is working to produce specific structures, such as an electrical junction inside the material as it is drawn. "We could put other metals in there, like gold or copper, and make a real electrical circuit," he says.

Fink adds that this is "a new way of thinking about fibers, and it could be a way of getting fibers to do a lot more than they ever have." As mobile devices continue to grow into an ever-larger segment of the electronics business, for example, this technology could open up new possibilities for electronics—including and microchips—to be incorporated into fibers and woven into clothing or accessories.

New approach could enable low-cost silicon devices in fibers that could be made into fabrics
A collection of leftover scraps from the fiber-making process. Credit: Jose-Luis Olivares/MIT

"Optical fibers are central to modern communications and information technologies, yet the materials and processes employed in their realization have changed little in 40 years," says John Ballato, director of the Center for Optical Materials Science and Engineering Technologies at Clemson University in South Carolina, who was not involved in this research. He says, "Of particular importance here is that the starting and ending core composition are entirely different. Previous work focused on chemical reactions and interactions between core and clad phases, but never such a wholesale materials transformation."

Henry Du, a professor of chemical engineering and at Stevens Institute of Technology in Hoboken, NJ, who also was not associated with this research, says "This work is simply beautiful." He adds that "this new strategy will enable the fabrication of new classes of functional fibers that would otherwise be difficult, if not impossible, using the traditional approach."

  • New approach could enable low-cost silicon devices in fibers that could be made into fabrics
    Chong Hou stands on the elevator in front of the fiber drawing tower. He loads the preform at the top of the tower, and the machine then heats and stretches the preform, altering its properties. “When we looked inside the core, we didn’t see shiny aluminum. We didn’t know what happened,” Hou says. Upon analysis, the researchers found that the core had turned to silicon — in fact, very pure, crystalline silicon. Credit: Jose-Luis Olivares/MIT
  • New approach could enable low-cost silicon devices in fibers that could be made into fabrics
    The fiber drawing furnace, which heats the tubes to about 2,200 degrees Celsius. Credit: Jose-Luis Olivares/MIT
  • New approach could enable low-cost silicon devices in fibers that could be made into fabrics
    An illustration explaining the changes happening in the aluminium-core preform to silicon-core fiber drawing process.

Journal information: Nature Communications

This story is republished courtesy of MIT News (web.mit.edu/newsoffice/), a popular site that covers news about MIT research, innovation and teaching.

Citation: New approach could enable low-cost silicon devices in fibers that could be made into fabrics (2015, February 20) retrieved 28 March 2024 from https://phys.org/news/2015-02-approach-enable-low-cost-silicon-devices.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Implanting complex multimodal fibers into the spinal column

42 shares

Feedback to editors